Tubing for drip irrigation is the main water line to emitters and emitter tubing

PRODUCT PAGES

TUBING Blank tubing (tubing without emitters built in) is used throughout a drip system. The tubing, made of thin-walled black soft polyethylene, is the main line that transfers water from the source to various emitter lines or sprinklers. This tubing is flexible enough to easily accommodate the various fittings and connections you will be using.

FITTINGS/VALVES The easiest fittings to use, can be taken apart to make changes in your system.

T-TAPE The lowest cost drip system for rows, raised beds, or any scale of commercial agriculture or backyard gardening.

T-TAPE FITTINGS Barbed fittings to connect tape to mainline tubing and for tape-tape connections.

MICRO IRRIGATION Micro Irrigation brings water to plants located away from the main irrigation system through the use of micro tubing, dripline, fittings, emitters, sprinklers, sprayers, misters & stakes.

TIMERS When you're not there to turn the water on, or when you forget to turn it off and run up your water bill, a battery timer can be your best investment.

WATER FILTERS Filters , necessary for every drip irrigation system, remove sediment and other particles large enough to clog emitters.

PRESSURE REGULATORS Pressure Regulators are used to reduce the incoming water pressure that is too high for drip emitters and fittings.

IN-LINE EMITTER TUBING 1/2” polyethylene tubing with pressure compensating emitters extruded into the tubing at the factory. Offered in a variety of emitter spacing and flow rates. 1/4" tubing with 1/2 gallon per hour emitters at variable spacings.

DRIP CIRCLES Inexpensive, adaptable, drip circles for tree watering

EMITTERS Self-flushing pressure compensating emitters at .6, 1 and 2 GPH flow rates.

SPRINKLERS/SPRAYERS/MISTERS Economical ways to cover large areas or to meet specific needs

DRIP KITS Kits in three price ranges for vegetable gardens, patio/container plants, trees & shrubs and landscape garden beds

FERTILIZER INJECTORS The most efficient way to feed plants, utilizing your drip irrigation system,

TOOLS/BATTERIES Tools for installing and maintaining your drip system.

ADAPTORS For connecting drip irrigation parts with differing threads (hose/pipe).

HOSE FITTINGS Shut-offs and other convenient adapters.

GARDENING TOOLS

PRUNING TOOLS

BROADFORK GARDEN TILLER

1/2" MAINLINE TUBING and 3/4"MAINLINE TUBING

Blank tubing (tubing without emitters built in) is used throughout a drip system. The tubing, made of thin-walled black soft polyethylene, is the main line that transfers water from the source to various emitter lines or sprinklers. This tubing is flexible enough to easily accommodate the various fittings and connections you will be using. (The dimension of the 1/2” tubing is .700 O.D., the 3/4” mainline tubing is .940 O.D.). The 1/2" and 3/4" is designed to have holes punched into it for emitters and transfer barbs. Blank tubing can last 8 years or more when exposed to sunlight, longer if mulched over or buried. Garden pruners can be used to cut the tubing.
NOTE: A kink in mainline tubing is not a problem, it will not cause a weak spot and will disappear under pressure unless the line is bent too sharply (for sharp bends to go around corners use an elbow.)

1/2" MAINLINE TUBING

50' roll

3/4" MAININE TUBING

Blank tubing main line transfers water to sub-lines and emiter lines

FLATUBE

This tubing is used in commercial systems. Flatube is a larger diameter pollyethylene tubing extruded in an oval shape so it can be shipped by UPS. It is used mainly as a high flow, low pressure header for T-Tape. Tape Loc barbed fittings can be inserted directly into it.

Uses standard barbed fittings and hose clamps or 1" Easy Loc fittings for 1" Flatube.
Holes for barbed fittings can be make with a manual punch or drill.
Will last 7+years in direct sun, longer if buried

1" FLATUBE

250' roll, 48 PSI Max, 780 GPH flow with 4 lbs. pressure loss per 100 ft.

1 1/2" FLATUBE

This 1 1/2" diameter flatubing has a flow rate of 2,220 GPH.

The 150' roll and 300' roll are rated at 21 PSI, and the 350' roll (HP) is rated at 44 PSI.

2" FLATUBE

The 2" Flatube has a flow rate of 4,380 GPH

The 150' roll of Flatube is rated at 21 PSI Max, the 200' (HP) is rated at 44 PSI Max

100' roll 1/2" tubing

1/2" MAINLINE TUBING, 500' ROLL

13-12500X

50' roll 3/4" tubing

MAINLINE TUBING

MAINLINE & MICRO TUBING

1/2" Mainling Tubing and 1/4" Micro Tubing

For 1/4" tubing go to

MICRO TUBING

product page.

Cart

Items	0
Subtotal	$0.00

TUBING

FITTINGS/VALVES

T-TAPE

T-TAPE FITTINGS

MICRO IRRIGATION

TIMERS

WATER FILTERS

PRESSURE REGULATORS

IN-LINE EMITTER TUBING

DRIP CIRCLES

EMITTERS

SPRINKLERS/SPRAYERS/MISTERS

DRIP KITS

FERTILIZER INJECTORS

TOOLS/BATTERIES

ADAPTORS

HOSE FITTINGS

GARDENING TOOLS

PRUNING TOOLS

BROADFORK GARDEN TILLER

1/2" MAINLINE TUBING, 50' roll

1/2" MAINLINE TUBING, 100' roll

1/2" MAINLINE TUBING, 500' roll

3/4" MAINLINE TUBING, 50' roll

3/4" MAINLINE TUBING, 100' roll

3/4" MAINLINE TUBING, 250' roll

1" x 250' (SKU: 1-F1250)

1 1/2" x 150' (SKU: 2-112150)

1 1/2" x 300' (SKU: 3-F112300)

1 1/2" x 350' (SKU: 4-F112350HP)

2" x 150' (SKU: 5-F2150)

2" x 200' (SKU: 6-F2200HP)

1/2" MAINLINE TUBING, 500' ROLL

MAINLINE TUBING

MAINLINE & MICRO TUBING

Cart