Home  |  Product Search  |  Site Map  |  Checkout
 
TUBINGBlank tubing (tubing without emitters built in) is used throughout a drip system. The tubing, made of thin-walled black soft polyethylene, is the main line that transfers water from the source to various emitter lines or sprinklers. This tubing is flexible enough to easily accommodate the various fittings and connections you will be using.
FITTINGS/VALVESThe easiest fittings to use, can be taken apart to make changes in your system.
T-TAPEThe lowest cost drip system for rows, raised beds, or any scale of commercial agriculture or backyard gardening.
T-TAPE FITTINGSBarbed fittings to connect tape to mainline tubing and for tape-tape connections.
MICRO IRRIGATIONMicro Irrigation brings water to plants located away from the main irrigation system through the use of micro tubing, dripline, fittings, emitters, sprinklers, sprayers, misters & stakes.
TIMERSWhen you're not there to turn the water on, or when you forget to turn it off and run up your water bill, a battery timer can be your best investment.
WATER FILTERSFilters , necessary for every drip irrigation system, remove sediment and other particles large enough to clog emitters.
PRESSURE REGULATORSPressure Regulators are used to reduce the incoming water pressure that is too high for drip emitters and fittings.
IN-LINE EMITTER TUBING1/2” polyethylene tubing with pressure compensating emitters extruded into the tubing at the factory. Offered in a variety of emitter spacing and flow rates. 1/4" tubing with 1/2 gallon per hour emitters at variable spacings.
DRIP CIRCLESInexpensive, adaptable, drip circles for tree watering
EMITTERSSelf-flushing pressure compensating emitters at .6, 1 and 2 GPH flow rates.
SPRINKLERS/SPRAYERS/MISTERSEconomical ways to cover large areas or to meet specific needs
DRIP KITSKits in three price ranges for vegetable gardens, patio/container plants, trees & shrubs and landscape garden beds
FERTILIZER INJECTORSThe most efficient way to feed plants, utilizing your drip irrigation system,
TOOLS/BATTERIESTools for installing and maintaining your drip system.
ADAPTORSFor connecting drip irrigation parts with differing threads (hose/pipe).
HOSE FITTINGSShut-offs and other convenient adapters.
GARDENING TOOLS
PRUNING TOOLS
BROADFORK GARDEN TILLERBROADFORK GARDEN TILLER
MICRO-TUBING 
SUPPORT STAKES
 
SUPPORT STAKES  (4" and 6") elevate and hold 1/4" micro tubing, allowing easy inspection of emitters at tubing end (and keeping emitters away from dirt and insects) and also keeps tubing and emitters from being accidentally moved. 
SUPPORT STAKES

SUPPORT STAKES

___________

 

More Stakes can be found on TOOLS page.

 

___________

VARI-FLO VALVE
Use Vari-Flo Valves to make any mini-sprinkler or sprayer adjustable. These valves can also be used in place of a 1/4" transfer barb to start a row with shut-offs for individual plants or groups of plants. For 1/4" tubing the barbed valve works best. Use the threaded valve with 1/8" tubing or with Rigid Risers.
BARBED VARI-FLO VALVE
Micro Irrigation

1/4" & 1/8" TUBING, FITTINGS and MISTERS

1/4" DRIPLINE can be found with IN-LINE EMITTER TUBING

Micro Irrigation brings water to plants located away from the main irrigation system--or in window boxes or planters-- through the use of micro tubing, dripline, fittings, emitters, sprinklers, sprayers, misters & stakes...

1/4" MICRO TUBING  (.170" ID - .250" OD)

MICRO TUBING is the sub-main 1/4 inch tubing (and the 1/8" inch tubing, also on this page) to which can be connected extensions of 1/4” drip tubing or sprayers, misters, etc.  It is available in from 50' to 1000' rolls, and is made from the same flexible black polyethylene as the larger mainline tubing. Use MICRO FITTINGS with this tubing.            

1/4"VINYL TUBING (.160"ID - .220" OD)

Softer and more flexible than polyethylene. Do not use at high pressure (over 30 PSI)

1/4"WHITE VINYL TUBING

More aesthetically pleasing than black micro tubing when extending to containers or hanging baskets.

1/4" WHITE VINYL MICRO TUBING

1/4" WHITE VINYL MICRO TUBING

1/4" WHITE VINYL MICRO TUBING
Click to enlarge image(s)
50' roll, White 1/4" tubing for extending tubing into containers or hanging baskets.
SKU: 25-1450WV
Price: $6.50
Qty:

 FITTINGS FOR 1/4" MICRO TUBING

1/4" micro fittings are used with 1/4" micro tubing and 1/4" emitter tubing and come in quantities of 10 or 100 pieces.

TRANSFER BARB
Use to connect 1/4" micro tubing to mainline tubing or to other 1/4" tubing. 

TRANSFER BARB (10) (SKU: 30-14TB)
Price: $1.45
Qty:
More info ►
 TRANSFER BARB (100) (SKU: 31-14TBC)
Price: $13.00
Qty:
More info ►
ELBOW
Use to create a right-angle bend.
ELBOW (10) (SKU: 34-1490)
Price: $1.90
Qty:
More info ►
 ELBOW (100) (SKU: 35-1490C)
Price: $18.00
Qty:
More info ►
TEE, CROSS
Use TEE to Branch off in two direction, CROSS to branch in 3 directions.
TEE (10) (SKU: 36-14T)
Price: $1.90
Qty:
More info ►
 TEE (100) (SKU: 36c-14T)
Price: $18.00
Qty:
More info ►
 CROSS (10) (SKU: 38-14C)
Price: $2.40
Qty:
More info ►
 CROSS (100) (SKU: 38c-14C)
Price: $23.40
Qty:
More info ►
ONE WAY GOOF  PLUGS
Neatly plugs small holes or ends a 1/4" line.
Use to patch a hole where a 1/4" barb was removed or as an end for 1/4" emitter  line. when inserted fits flat on mainline tubing. 
TWO WAY GOOF PLUGS
Either barbed side can be used to plug small or large holes in mainline tubing or to end 1/4" emitter line. A necessary item to keep on hand for repairs.
THREADED CONNECTORS

32x-14TBC is a thread x barbed connector which is used to connect Rigid Riser to the irrigation system (this connector can also be used to connect 1/4" Micro Tubing to PVC). Insert threaded end into Rigid Riser (or into PVC) and barbed end into either 1/4" Micro Tubing or directly into mainline tubing.

33x-14TTB is threaded on both ends: one end inserts into Rigid Riser and the other directly into mainline tubing (this will keep a short Rigid Riser in an upright position. The hexagonal shape on this connector matches that on the back of the yellow Punch Tool (601-PUY) which can be used to thread the connector into the Rigid Riser. This tool can also be used to assist inserting threaded connecter into PVC tubing.

Rigid Risers can be found on the Sprinklers/Sprayers/Misters page

 

1/8" MICRO TUBING

1/8" Micro Tubing is used for connecting spray stakes and pot drippers to the system.

FITTINGS for 1/8" MICRO TUBING

1/8" Micro Fittings are used with 1/8" tubing, and to connect 1/8" to 1/4" tubing.
1/8" TEE (10) (SKU: 39-18T)1/8" TEE (10) (SKU: 39-18T)
Price: $1.90
Qty:
More info ►
 1/8" TEE (100) (SKU: 39c-18T)
Price: $18.00
Qty:
More info ►
MISTERS
MINI MISTERS & TORNADO MISTERS
These misters provide an excellent way to water plants like ferns, fog-loving perennial plants, garden greens and for starts in garden beds. ALL MISTERS NEED A 200 MESH FILTER


MINI MISTERS
Low flow directional sprayers for misting individual plants (fuchia, azaleas, bonsai, and other fog-loving plants)
Stakes (619-SS4 & 6 on this page--or other stakes on TOOLS/BATTERIES page) are recommended for support and for directional spray.

Each Mini Mister has a 1/4" barb for attaching to 1/2" mainline tubing or 1/4" tubing end.
@20 PSI pressure each uses only 2.3 GPH

(5) Mini-Misters (SKU: 608-MM)
Price: $3.50
Qty:
More info ►
 (100) Mini-Misters (SKU: 609-MM)
Price: $63.00
Qty:
More info ►
TORNADO MISTERS
Tornado Misters prduce an evely distributed mist. They work best between 20 & 60 PSI water pressure. All Tornado Misters have a threaded base that can be easily inserted into 1/2" mainline tubing or into the end of 1/4" micro tubing. They can also be attached to PVC using a drill and a 10/24 thread tap.

Black misters give a 4' diamerter spray, flow rate 4 GPH @ 20 PSI, 5 1/2 GPH @ 40 PSI
Red misters give a 6' diameter spray, flow rate 8 GPH @ 20 PSI, 11 1/2 GPH @ 40 PSI
_______________________________

PUNCH TOOLS for extending micro-tubing and fittings from mainline tubing are found on TOOLS page