Drip Fittings: Couplers, elbows, tees, connectors, valves for drip irrigation systems

TUBING Blank tubing (tubing without emitters built in) is used throughout a drip system. The tubing, made of thin-walled black soft polyethylene, is the main line that transfers water from the source to various emitter lines or sprinklers. This tubing is flexible enough to easily accommodate the various fittings and connections you will be using.

FITTINGS/VALVES The easiest fittings to use, can be taken apart to make changes in your system.

T-TAPE The lowest cost drip system for rows, raised beds, or any scale of commercial agriculture or backyard gardening.

T-TAPE FITTINGS Barbed fittings to connect tape to mainline tubing and for tape-tape connections.

MICRO IRRIGATION Micro Irrigation brings water to plants located away from the main irrigation system through the use of micro tubing, dripline, fittings, emitters, sprinklers, sprayers, misters & stakes.

TIMERS When you're not there to turn the water on, or when you forget to turn it off and run up your water bill, a battery timer can be your best investment.

WATER FILTERS Filters , necessary for every drip irrigation system, remove sediment and other particles large enough to clog emitters.

PRESSURE REGULATORS Pressure Regulators are used to reduce the incoming water pressure that is too high for drip emitters and fittings.

IN-LINE EMITTER TUBING 1/2” polyethylene tubing with pressure compensating emitters extruded into the tubing at the factory. Offered in a variety of emitter spacing and flow rates. 1/4" tubing with 1/2 gallon per hour emitters at variable spacings.

DRIP CIRCLES Inexpensive, adaptable, drip circles for tree watering

EMITTERS Self-flushing pressure compensating emitters at .6, 1 and 2 GPH flow rates.

SPRINKLERS/SPRAYERS/MISTERS Economical ways to cover large areas or to meet specific needs

DRIP KITS Kits in three price ranges for vegetable gardens, patio/container plants, trees & shrubs and landscape garden beds

FERTILIZER INJECTORS The most efficient way to feed plants, utilizing your drip irrigation system,

TOOLS/BATTERIES Tools for installing and maintaining your drip system.

ADAPTORS For connecting drip irrigation parts with differing threads (hose/pipe).

HOSE FITTINGS Shut-offs and other convenient adapters.

GARDENING TOOLS

PRUNING TOOLS

BROADFORK GARDEN TILLER

These Easy-Turn Fittings are the easiest fittings to use and they hold very well at higher pressures. They can be taken apart to make changes in your system. They can be hand tightened—but test after installing; and if there is any leak at all, tighten additionally with pliers. The 1/2” fittings are gauged to work with tubing having .700 O.D. (the dimention of the 1/2” tubing we sell.) The 3/4” fittings work with our 3/4” mainline tubing which is .940 O.D.

1/2" FITTINGS

Click to enlarge image(s)

For joining or for repairing a damaged section of 1/2" mainline tubing.

Click to enlarge image(s)

Use for a right angle turn around a corner, a sharp turn that would otherwise kink the mainline tubing

Click to enlarge image(s)

Use to branch off mainline tubing

Click to enlarge image(s)

To shut off the flow to a section of mainline tubing.

Use to attach mainline tubing to a faucet, hose end or the maile hose threads of afilter or adapter.

Use to end a line. The screw off cap makes it easy to flush lines.

Click to enlarge image(s)

Connects 1/2" emitter lline or 1/2 tubing to mainline tubing without using a Tee. Make hole with a 1/4" punch and insert barbed end. Great in orchards for making a loop of In-Line Emitter Tubing around a tree. Maximum flow through this fitting is around 80 GPH.