Emitter tubing for drip irrigation, drip emitters are already inserted in line at specific intervals

On this page you'll find in-line emitter tubing

--you may also be interested in separate emitters which can be placed into blank tubing wherever desired.

TUBING Blank tubing (tubing without emitters built in) is used throughout a drip system. The tubing, made of thin-walled black soft polyethylene, is the main line that transfers water from the source to various emitter lines or sprinklers. This tubing is flexible enough to easily accommodate the various fittings and connections you will be using.

FITTINGS/VALVES The easiest fittings to use, can be taken apart to make changes in your system.

T-TAPE The lowest cost drip system for rows, raised beds, or any scale of commercial agriculture or backyard gardening.

T-TAPE FITTINGS Barbed fittings to connect tape to mainline tubing and for tape-tape connections.

MICRO IRRIGATION Micro Irrigation brings water to plants located away from the main irrigation system through the use of micro tubing, dripline, fittings, emitters, sprinklers, sprayers, misters & stakes.

TIMERS When you're not there to turn the water on, or when you forget to turn it off and run up your water bill, a battery timer can be your best investment.

WATER FILTERS Filters , necessary for every drip irrigation system, remove sediment and other particles large enough to clog emitters.

PRESSURE REGULATORS Pressure Regulators are used to reduce the incoming water pressure that is too high for drip emitters and fittings.

IN-LINE EMITTER TUBING 1/2” polyethylene tubing with pressure compensating emitters extruded into the tubing at the factory. Offered in a variety of emitter spacing and flow rates. 1/4" tubing with 1/2 gallon per hour emitters at variable spacings.

DRIP CIRCLES Inexpensive, adaptable, drip circles for tree watering

EMITTERS Self-flushing pressure compensating emitters at .6, 1 and 2 GPH flow rates.

SPRINKLERS/SPRAYERS/MISTERS Economical ways to cover large areas or to meet specific needs

DRIP KITS Kits in three price ranges for vegetable gardens, patio/container plants, trees & shrubs and landscape garden beds

FERTILIZER INJECTORS The most efficient way to feed plants, utilizing your drip irrigation system,

TOOLS/BATTERIES Tools for installing and maintaining your drip system.

ADAPTORS For connecting drip irrigation parts with differing threads (hose/pipe).

HOSE FITTINGS Shut-offs and other convenient adapters.

GARDENING TOOLS

PRUNING TOOLS

BROADFORK GARDEN TILLER

1/2" EMITTER TUBING and 1/4" DRIPLINE MICROTUBING

This popular best-selling 1/2" IN-LINE EMITTER TUBING has the following advantages:

Even watering--even over hilly terrain and long rows
Installation time is greatly reduced
Clog resistant emitters are self-flushing
Uses same fittings as our 1/2"tubing
Versatile--can be used as a supply line for other emitters or 1/4" soaker dripline
Flexible--curves to make drip circles around trees
Long lasting-- 8+years exposed to sunlight, longer if mulched over

Available with either 1/2 or 1 gallon pressure compensating emitters
.600 I.D. x .700 O.D.
Operating Pressure range 10-50 PSI

Rolls of 500' (model # ending in "X") have an additional shipping charge of $8

Offered in a variety of emitter spacing and in two emitter flow rates. The different emitter spacings are to allow for choices depending on soil type. The in-line pressure compensating emitters have the same flow regardless of pressure and are self-flushing (clog resistant).

9" Emitter Spacing

1/2 GPH & 1 GPH flow rates per emitter

12" Emitter Spacing

1/2 GPH & 1 GPH flow rates per emitter

18"Emitter Spacing

1 GPH flow rate per emitter

24" Emitter Spacing

1 GPH flow rate per emitter

36" Emitter Spacing

1 GPH flow rate per emitter

48" Emitter Spacing

1 GPH flow rate per emitter

1/4” IN-LINE EMITTER TUBING

The easiest and most flexible drip tubing to use--great in raised beds, short rows or containers, planter boxes or window boxes, small or irregularly shaped garden beds or for ringing large bushes or smaller trees.

Non pressure compensating
Good for short rows, flat terrain
Can be used with gravity or low pressure systems
Available in 6" or 12" spacing

HOW TO USE

Attach each 1/4" drip line to mainline tubing with a transfer barb (MICRO FITTINGS). End each line with a goof plug.

TUBING HOLD DOWNS are great for holding the lines in place.This micro-irrigation tubing is flexible enough to wind through flower beds or borders, around trees or shrubs and can be used in container planting. It's ideal for “square foot” or intensive gardening beds.

6" Emitter Spacing

1/2 GPH Average flow per emitter*