TOOLS

Home \| Product Search \| Site Map \| Checkout

PRODUCT PAGE SITE DIRECTORY

IRRIGATION COMPONENTS:

Pressure Regulators

EMITTER TYPES

T-Tape

In-Line Emitter Tubing

Drip Circles

Drip Emitters

Sprinklers/Sprayers/Misters

KITS:

Drip Kits

Create My Drip Irrigation Kit

ACCESSORIES:

Support Stakes/Tubing Hold Downs/Clamps/Hangers

Fertilizer Injectors

GARDENING:

Broadfork Garden Tiller

Pruning Tools

FROM TOP TO BOTTOM: 610-SUHD-- 613-SBHD-- 616-SS5

TUBING HOLD DOWNS are now located on ACCESSORIES page.

Support stakes are located on ACCESSORIES page

Home › Products › TOOLS

BACKFLOW PREVENTOR

A backflow preventor will prevent water from the irrigation system from back-flowing and contaminating drinking water. Definitely use as a precaution when fertilizer is injected into a system.

Solid Brass, FHT x MHT (SKU: 695-FBFP)

Heavy-duty plastic (SKU: 696-FBFPP)

PUNCH TOOLS

For punching holes in 1/2" and 3/4" mainline for inserting 1/4" fittings and Tape-Loc fittings.

For making holes in mainline tubing for inserting emitters.

MIRACLE PUNCH

To make a big job much easier this tool punches clean holes quickly and easily. Slip the 1/2" or 3/4" tubing completely into the channel and squeeze the handle until you hear the pop. The 602-PUM punches 1/4" holes, the 606-PUMK punches larger holes (i.e. for inserting Katif emitters). Extra tips are available for three different sized holes (blue: 1/4", Green: Katif size, Red: 1/8"--for micro tubing).

606-PUMK

1/4" hole Miracle Punch (SKU: 602-PUM)

Large hole Miracle Punch (SKU: 606-PUMK)

ADDITIONAL TIPS FOR MIRACLE PUNCH (Featured in right-hand column)

1/4" tip (blue) (SKU: 666-PUMTIP)

large Tip (green) (SKU: 668-PUMKTIP)

1/8" Tip (red) (SKU: 667-PUM18TIP)

Click to enlarge image(s)

Indestructible, spring loaded, cast aluminum pnch that works like pruners to make a clean hole.

Click to enlarge image(s)

This wood handle punch is used for making holes in poly tubing for 1/8" fittings.

Click to enlarge image(s)

POCKET PUNCH easily punches holes for 1/4" barbed fittings or emitters into 1/2" mainline tubing. The built-in holder helps when installing transfer barbs or some emitters.

Click to enlarge image(s)

PUNCH 'N CUT tool can be used 3 ways:
It will punch holes for 1/4" fittings or emitters into any size mainline tubing or into flatube.
Used as an insert tool it will hold a transfer barb or some emitters to make installation easier.
As a cutting tool it will cut mainline tubing and PVC Schedule 40 up to 1" in diameter.

NEW! Pressure + Flow Gauge

This handy gauge will let you see both your water flow and your water pressure. Water pressure can be measured up to 160 PSI. Water flow can be measured up to 13 GPM (or 780 GPH). This gauge helps you determine the water capacity limitations that directly impact the design and performance of your drip irrigation system.

No landscaper should be without one!

BRASS OR PLASTIC

For 1/4" and Tape Loc fittings

Items:	0
Subtotal:	$0.00

TIPS FOR MIRACLE PUNCH

PRESSURE GAUGES

Use to find what your pressure really is. These gauges have hose swivel adapters to hook up to a faucet, the end of a hose or in-line to measure within a drip system. Lower cost 631-PGH200 has hose thread--but no swivel.